GAC's Qirun Power has become the first company in the world to mass-produce 100,000 amorphous-core electric drive units, according to Chinese auto outlet PCauto. The milestone was reached on November 20 at the Ruipai plant, just two months after GAC and the Chinese Academy of Sciences' Dongguan Institute of Materials Science and Technology showcased three production models using the technology.
The amorphous alloy drive unit uses a core made from ultra-thin metal ribbon just 0.025 mm thick, known in China as 'hand-tear steel' for its fragility. Compared with conventional silicon steel cores, the amorphous material cuts core losses by 75% and boosts peak motor efficiency to 99.03%, GAC claims. For drivers, this translates into roughly one extra kilometre of range per kilowatt-hour of battery energy, with particular benefits at highway speeds where electric motors typically lose efficiency.
From lab to family cars
The technology is already fitted to three Aion models - the Aion RT, Aion N60 and Aion i60 - covering the mainstream 90,000-120,000 yuan (about $12,700-$16,900) family car segment. The Aion RT has set a Guinness World Record for the lowest energy consumption on a highway loop around Hainan Island, achieving 8.571 kWh/100 km, while the Aion i60 pure-electric version consumes just 12.3 kWh/100 km.
GAC says the 100,000-unit production run delivers significant environmental benefits. Based on an annual driving distance of 20,000 km per vehicle, the installed drives could save more than 20 million kWh of electricity and cut carbon emissions by over 12,000 tonnes per year - roughly equivalent to the annual CO2 absorption of 1.1 million trees.
The amorphous drive unit is not limited to battery-electric vehicles (BEVs). GAC says the technology can be adapted for plug-in hybrids (PHEVs) and range-extender electric vehicles (EREVs), allowing the same material and software architecture to be reused across different powertrains.
Supply chain and future applications
Qirun Power has built a fully automated production line that covers everything from amorphous material casting to final assembly, giving GAC end-to-end control of the supply chain. The company also operates a battery smart factory that handles cell-to-pack production in-house.
Beyond cars, GAC sees potential for amorphous motors in intelligent robots and low-altitude flying vehicles, pointing to a broader push into next-generation power technologies. The 100,000-unit milestone is just the beginning, the company says, with further cost optimisation and wider vehicle adoption expected.